Water Quality Advisory – High Chlorine Levels

An issue with the chlorine pump has caused too much chlorine to be added to the water. Maximum recommended levels are 4 parts per million (ppm); this mornings measurement at the tank was close to 6 ppm. Usual level is around 3 ppm.

The quickest way to remove chlorine from water is by boiling for 15 mins. Alternatively, leaving the water in a pot or other container with wide opening for at least 24 hours will remove the chlorine by evaporation.

Please share this with others, especially to those with pre-existing health conditions.

We are currently working on resolving the issue.